The reason why the gas water heater can't catch fi

2022-07-22
  • Detail

Gas water heater is one of the mainstream water heaters in our home life. What if the gas water heater can't catch fire? What are the reasons why the gas water heater can't catch fire? Next, let's understand the reason why the gas water heater can't start

gas water heater is one of the mainstream water heaters in our home life. What if the gas water heater can't start? What are the reasons why the gas water heater can't catch fire? Next, let's understand the reason why the gas water heater can't start

reasons why the gas water heater can't start fire 1. Solenoid valve fault

solution to the problem: if only the ignition sound is heard when the ignition is on, there is no solenoid valve “ Da ” Magnetic sound absorption may be due to the damage or aging of the solenoid valve. The aging of the solenoid valve will be uncontrolled. It can be absorbed at the beginning of the ignition, so that it can catch fire, but then it closes and stops; It may also be that the gas pressure is too high or too low, and the output pressure of the cylinder pressure relief valve will be too high or too low when using the water heater with cylinder gas, and the water heater cannot catch fire; It is more likely that the solenoid valve has dirt

the solenoid valve cannot pass through the gas, and the fuel gas (natural gas, liquefied petroleum gas, artificial gas) cannot come out, so that it cannot ignite. Before confirming the quality of the solenoid valve, confirm whether the control circuit of the igniter is normal. If there is a fault, the solenoid valve cannot be controlled to pull in

reasons why the gas water heater can't catch fire 2. Power supply problem

solution: check whether the indicator light of the AC power plug is on, and first eliminate the problem of the power supply part of the power supply

the reason why the gas water heater can't ignite 3. The problem of ignition porcelain needle or induction porcelain needle

solution:

a. it's very difficult to ignite when the ignition needle is out of position or aging, so you can replace or place the ignition needle correctly

b. for induction aging, you can polish the induction and place it well (so that the flame can fully burn the induction needle no matter the fire is large or small)

reasons why the gas water heater can't ignite 4. Electric igniter fault

solution: if one of the pulse igniter and the controller is faulty, the water heater can't ignite

the reason why the gas water heater can't catch fire 5. The valve seal rises after being corroded by gas

solution: replace parts

reasons why the gas water heater can't catch fire 6. The air source switch is not opened or the air inlet filter screen is blocked

solution: turn on the air source and clean the air inlet filter screen

reasons why the gas water heater can't fire 7. The smoke pipe can't exhaust the gas normally

solutions: a. the smoke pipe is blocked, clean up the blockage of the smoke pipe; b. The smoke pipe is too long and not installed correctly

I'll introduce the reason why the gas water heater can't start. I hope it can help you. More decoration information is available. Please look forward to it

福州男科医院

郑州癫痫医院

郑州胎记疤痕医院

北京胎记疤痕医院

Copyright © 2011 JIN SHI